Board logo

标题: For T43 owner which upgrade their HD with aftermarket HITACHI/HGST [打印本页]
作者: bobwu    时间: 2006-4-7 10:25     标题: For T43 owner which upgrade their HD with aftermarket HITACHI/HGST

For T43 owner which upgrade their HD with aftermarket HITACHI/HGST:
link:
http://forum.thinkpads.com/viewtopic.php?t=20858
-------------------------------------------------------------------------------------
On the link above MESSAR wrote:
Warrning: Updating failure may cause unrecoverble damage to your harddisk and it may not work! This guide is only for power users.
Part A: Guide for updating retail harddisks except Hitachi 5K100/7K100 series
Step 1. Download the iso image from the following link
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62282
Step 2. Burn the image file into a CD-R or CD-RW disc
Step 3. Check the FW.PRO file in the disc, take a 60GB harddisk of 5K80 series for example here:
; Hitachi : HTS5480xxM9AT00
;
; HTS548060M9AT00 60.0GB
"HTS548060M9AT00","MGBOA50A","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
"HTS548060M9AT00","MGBOA55A","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
"HTS548060M9AT00","MGBOA5BA","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
"HTS548060M9AT00","MGBOA5DA","MGBOA5HA","MGBIA5HA.bin","hfui12L.exe","IA5HA","/u MRLA5HA.tbl"
We can see that the phrases include 4 parts of information for automated flashing work:
MGBIA5HA.bin: New firmware file
hfui12L.exe: Flash program for specified harddisk
IA5HA: Version control phrase
MRLA5HA.tbl: CHECKSUM file
Find the phrases whitch matchs your harddisk and write down the 4 parts for following work.
Step 4. Boot with the disc, press "F5" key after seeing the boot messege to skip the autoexec program
Step 5. Type in the command in the following format:
[Flash program] [Version control phrase, first char. change to O] [New firmware file] /F [CHECKSUM file]
Take a 60GB harddisk of 5K80 series for example, the command should be:
hfui12L.exe OA5HA MGBIA5HA.bin /F MRLA5HA.tbl
Excute the command and press "U" in the program, you will see the failure information. That';s doesn';t matter, let';s exit the program and continue to the next step.
Step 6. Type in the command in the following format:
[Flash program] [Version control phrase] [New firmware file] /F [CHECKSUM file]
Take a 60GB harddisk of 5K80 series for example, the command should be:
hfui12L.exe IA5HA MGBIA5HA.bin /F MRLA5HA.tbl
Excute the command and press "U" in the program, you will see the PASS information.
Congratulations! Your harddisk has been updated to IBM official firmware

Part B: Guide for updating retail Hitachi 5K100s and 7K100s
Step 1. Download the 1.44M floppy image I provided, for I can not post with attachment here, the file is uploaded to rapidshare, please download from the following link:
http://rapidshare.de/files/13537522/5K7K100.rar.html
Step 2. Write the image file into a floppy disk or a flash stick. It';s also ok for choosing the software boot solution (vfloppy or some others), but you need another tool to extract the FW.PRO file from the image.
Step 3. Check the FW.PRO file in the disk, take a 80GB harddisk of 5K100 series for example here:
; Hitachi : HTS5410xxG9AT00
;
; HTS541080G9AT00 80.0GB
"HTS541080G9AT00","MB4IA5BJ","MB4IA60A","MB4IA60A.bdr","hfui14.exe","IA60A","/u mpbA60Ab.tbl"
"HTS541080G9AT00","MBYIA5BJ","MBYIA60A","MBYIA60A.bdr","hfui14.exe","IA60A","/u mpbA60Ab.tbl"

We can see that the phrases include 4 parts of information for automated flashing work:
MBYIA60A.bdr: New firmware file
hfui14.exe: Flash program for specified harddisk
IA60A: Version control phrase
mpbA60Ab.tbl: CHECKSUM file
Find the phrases whitch matchs your harddisk and write down the 4 parts for following work.
Step 4. Boot with the disk
Step 5. Type in the command in the following format:
[Flash program] [Version control phrase, first char. change to O] [New firmware file] /F [CHECKSUM file]
Take a 80GB harddisk of 5K100 series for example, the command should be:
hfui14.exe OA60A MBYIA60A.bdr /F mpbA60Ab.tbl
Excute the command and press "U" in the program, you will see the failure information. That';s doesn';t matter, let';s exit the program and continue to the next step.
Step 6. Type in the command in the following format:
[Flash program] [Version control phrase] [New firmware file] /F [CHECKSUM file]
Take a 80GB harddisk of 5K100 series for example, the command should be:
hfui14.exe IA60A MBYIA60A.bdr /F mpbA60Ab.tbl
Excute the command and press "U" in the program, you will see the PASS information.
Congratulations! Your harddisk has been updated to IBM official firmware
Note for 5K100 100G user: The FW.PRO file doesn';t contain a seprate part for 5K100 100G harddisk. Check the firmware version of your harddisk with AIDA32 or Everest before any work, if the firmware version is started with "MBYO", I think the following line should be the suite one for your 5K100 100G harddisk.
"HTS541080G9AT00","MBYIA5BJ","MBYIA60A","MBYIA60A.bdr","hfui14.exe","IA60A","/u mpbA60Ab.tbl"
-------------------------------------------------------------------------------------
I have 7K100 Hitachi with FIRMWARE MCZOA40M
command line FOR 7K100 100GB 7200rpm HITACHI :
A>hfui15.exe OA51A MCZIA51A.BDR /F MPCA51AB.TBL
press U in the program, see failure after trying to update. But it doesn';t matter. Exit the program then type following:
A>hfui15.exe IA51A MCZIA51A.BDR /F MPCA51AB.TBL
Press U again in the program, you should see Pass..Exit and Reboot..
Ya Da..
NO MORE 2010 ERROR MESSAGE AFTER ALL..
作者: aleekin    时间: 2006-4-28 12:36     标题: For T43 owner which upgrade their HD with aftermarket HITACHI/HGST

看了这篇文章无语了 一个也看不懂
作者: woodlk    时间: 2006-5-26 00:09     标题: For T43 owner which upgrade their HD with aftermarket HITACHI/HGST

昨天升级了硬盘的fireware，然后再升级bios，已经没有了2010，显卡显示的是256m，
作者: stuca    时间: 2006-5-26 08:05     标题: For T43 owner which upgrade their HD with aftermarket HITACHI/HGST

不错。
作者: j2t    时间: 2006-5-26 12:50     标题: For T43 owner which upgrade their HD with aftermarket HITACHI/HGST

下面引用由woodlk在 2006/05/26 00:09am 发表的内容：
昨天升级了硬盘的fireware，然后再升级bios，已经没有了2010，显卡显示的是256m，
性能呢。



欢迎光临 NBCLUB笔记本电脑俱乐部 合肥THINKPAD APPLE LENOVO DELL专卖店 (http://nbclub.net/discuz/) Powered by Discuz! 7.2