Board logo

标题: [软件] ThinkPad在Windows 7下使用Hotkey软件提供的 FN+F5 快捷键功能无反应 [打印本页]

作者: bobwu    时间: 2013-4-14 18:08     标题: ThinkPad在Windows 7下使用Hotkey软件提供的 FN+F5 快捷键功能无反应

故障现象:

ThinkPad
产品,Windows 7 系统下,hotkey驱动并安装之后,发现使用快捷键
Fn+F5启用无线和蓝牙开启/
关闭模块,无任何反应,或者会出现如下报错信息。而其它的快捷键功能(如音量键等)正常。



影响机型:


ThinkPad


受影响系统:


Windows 7


原因分析:


系统上未安装Access Connection
软件,Hotkey驱动中FN+F5的功能需要与Access Connection
软件配合使用。


解决方案:


1.
首先下载安装Access Connection软件,安装成功之后重启;

2.
之后安装hotkey驱动,FN+F5快捷键功能可以正常工作。



Hotkey 软件的其他使用参考:

NOTES

- (For Windows XP only) If this software is updated to version 3.02.0000 or
  higher, it is also required to update the following software.
  - Access Connections to version 5.50 or higher (for the Fn+F5 key function)
  - Power Manager to version 1.70 or higher (for the Fn+F3 key function)

Xp系统需要新版的Access Connections 和 Power Manager 软件配合使用


- (For Windows Vista/XP only) It is required to install Presentation Director
  version 4.04 or higher.

XP系统 需要安装 Presentation Director 软件配合使用

- (For Windows Vista only) The package just support Vista SP1 (service pack 1)
  or later if the Intel Video driver had been installed.


- (For Windows XP/7) If you want to use Access Connections with this package on
  ThinkPad X1, It is requred to install Access Connections to version 5.98 or

  higher to support Airplane Mode toggling in Fn+F5 dialog application.

ThinkPad X1 ,需要新版的 Access Connections 配合使用Airplane 和 Fn+F5 功能。

- (For upgrading to Windows 8) It is required to install this package again on
  Windows 8 even if same version of this package has been installed before
  the Windows upgrade.

升级到Windows8 , 需要卸载旧版Hotkey并重新安装Windows8 版本的Hotkey


作者: fyddt    时间: 2013-4-14 18:29

SF
作者: chengxyt    时间: 2013-4-14 20:40

BD




欢迎光临 NBCLUB笔记本电脑俱乐部 合肥THINKPAD APPLE LENOVO DELL专卖店 (http://nbclub.net/discuz/) Powered by Discuz! 7.2